Operating Your Components With The Remote Commander; Operating A Component - Sony RM-VZ950T Bedienungsanleitung

Operating Your
Components with the
Remote Commander
When you operate a non-Sony
component, make sure you set the
component code number first
(page 8).

Operating a component

1
2
Jog
dial
Tip
You can skip an unused component
from the selection menu by entering
"000" to the code number (page 10). To
put it back on the display, set the code
number to match your component.
Note
The remote control signals may be
different for some components or
functions. In this case, program the
remote control signals with the
Learning function (see page 15).
Turn the Jog dial to select
the component you want to
operate.
At the factory, the selection
order is preset as follows.
TV SAT
AMP TAPE
Notes
• If you have changed the name of
the component (page 26) that
name is displayed.
• You can change the selection
order also (page 24).
Press the button for the
desired function.
See "Table of Preset Functions"
(page 38) for the functions of
buttons for each component.
When a remote control signal is
sent, appears in the display.
V T
VCR DVD
MD
CD
Continued
13
GB