Changing Or Erasing The Function Of A "Learned" Button - Sony RM-VZ950T Bedienungsanleitung

Changing or erasing the
function of a "learned"
button
To change the "learned" function,
erase it first and perform Learning
again.
To erase the "learned" function
of a single button
Tip
You can also press b/B instead of
turning the Jog dial to the left/right.
You can also press OK instead of
pressing the Jog dial (except for the
following Steps 4 and 5).
Example: To erase the "learned"
function from the VCR Number
button 1
1
2
4,5
Jog
3
dial
Follow Step 2 on page 16 to
go to the LEARN mode.
Turn the Jog dial to select
the Setting position number
("S-1" to "S-8") of the
component you want to
erase. Then press the Jog
dial.
The component name flashes
in the display.
S -3
C V
L E A R N
Note
If you have changed the name of
the component (page 26) that name
is displayed.
Turn the Jog dial to select
"DEL," then press the Jog
dial.
"DEL" appears in the first row,
and "KEY?" flashes in the
display.
D EL
K EY
L E A R N
R
?
Continued
21
GB