VOLTCRAFT VC276 TRMS Bedienungsanleitung Seite 49

REL Relative measurement button (= reference measurement)
SELECT Switch between sub-modes
HOLD Freezes the current measurement
OL Overload = The measurement range was exceeded
LEAd "Incorrect socket" warning
OFF Move to this position to turn the multimeter off
True RMS Actual effective value measurement
Low imp. 400 kΩ Impedance switching in the V measurement range (10 MΩ to 400 kΩ)
EF Display for NCV function without voltage detection
- - - - Display for NCV function with voltage detection
Diode test symbol
Acoustic continuity tester symbol
Capacity measurement range symbol
Alternating current symbol
Direct current symbol
COM Connection for reference potential
mV Millivolt mode (exp. -3)
V Voltage mode (Volt = unit of electrical voltage)
A Current mode (Ampere = unit of electric current)
mA Milliamp mode (exp. -3)
µA Microamp mode (exp. -6)
Hz Frequency mode (Hertz = unit of frequency)
% Measurement function for pulse duration as a percentage (pulse-pause ratio)
Ω Resistance mode (Ohm = unit of electrical resistance)
°C°F Measurement function for temperature measurement
NCV Non-contact AC voltage detection
49