Before Initial Use - EASTEN 09143 Gebrauchsanleitung

EN
Control Panel and Display
24
21 Dial for activating the cross blade:
0 Switch off the cross blade
1 to 6 Switch on the cross blade at the corresponding speed level
TURBO While the dial is held in the TURBO position, the cross blade rotates at the
highest speed level.
For safety reasons, from a temperature of 60°C the maximum speed level is 2.
22 Button for switching the device on and off
23 Heating buttons 40°C, 60°C, 80°C, 100°C, 120°C for setting the temperature to which
the contents of the mixing bowl should be heated
24 Button for switching the pulse function on and off. With the pulse function, the
cross blade starts and stops automatically every 3 seconds. The device stops entirely
after 3 minutes. For safety reasons, this function is disabled when the mixing
bowl is being heated.

Before Initial Use

1. Remove any protective fi lms and transport restraints that may be present from the
device.
2. The accessories may still have some production residues on them. To avoid harmful
effects to your health, clean the device thoroughly before you fi rst use it (see the
"Cleaning and Storage" chapter).
3. Read the following chapter to familiarise yourself with the accessories.
30
19 Display shows
19
– the remaining operating time until an auto-
20
matic stop if a time has been set using the
– / + buttons;
– the operating time that has already passed if
no time has been set;
21
– (error) messages (see "Troubleshooting")
20 – / + buttons for setting the operating time (max.
22
60 minutes); the device stops automatically after
the operating time elapses. To run through the
numbers quickly, hold down the – / + button.
23