A) Set-Up And Installation Location; B) Set-Up; Wall Installation - Renkforce IO-40TB ELA Bedienungsanleitung

a) Set-up and installation location

Do not attach or install the speakers in the direct vicinity of TV monitors or computer monitors. There is a
risk of the magnetic field causing interferences.
The speakers can be used in protected outdoor areas.
• Try to facilitate the following installation tips as far as possible, in order to achieve optimum sound conditions:
- Position the speakers in such a way, that the distance of the listening location is equally far to both speakers
(equilateral triangle).
- For rectangular rooms, we suggest installing the speakers along one of the shorter walls.
Try to experiment a little with the installation location and direction of the speakers, until you have found the
best possible location.

b) Set-up

When installing the speakers in upright position, make sure the speakers stand securely on a stable and
vertical installation surface.
• Per default, the wall mounts (2) are pre-installed to the speakers. Loosen the installation screws (1) located on the
top and bottom of the speakers and then remove the wall mount.
• Place the speakers with the feet (5) facing down on a suitable surface.
• If needed, attach the installation screws only to the top of the speakers. Do not attach the installation screws to the
bottom of the speakers, as such would impact the stability of the device.
c) Wall installation
Wall installation is permitted only when the wall is of suitable construction. Make sure to perform the wall
installation securely and that all mounting devices as well as the mounting surface can withstand the weight
of the speakers. Speakers falling down could cause serious injury/damage.
Purchase special dowels and screws deepening on the wall structure, e.g. concrete. Contact a professional
before installation in case of doubt.
Carefully select the installation location in order for the speakers to be positioned as desired after installation.
When drilling installation holes or tightening screws, make sure not to damage any existing cables or pipes
(e.g. water pipes).
20