Troubleshooting; Care And Cleaning; Declaration Of Conformity (Doc); Technical Data - Renkforce 2162591 Bedienungsanleitung

b) AUX In Wired Connection
• Turn the source and speaker off.
• Connect the 3.5 mm AUX input (6) to the audio source, then turn the source power on.
• Turn the Power dial (3) clockwise to turn the speakers on, keep the volume levels low.
• Adjust the volume (3) levels as required.
c) Switching between AUX and Bluetooth Inputs
Touch the audio input selector button (1) to switch between AUX and Bluetooth inputs

Troubleshooting

Problem Suggestion
Check the device volume levels are turned up and make sure the device
No sound
sound is not muted.
Make sure there is no interference from nearby objects, and that the paired
device is within the transmission distance.
Cannot
pair with
If needed, remove the speakers from the Bluetooth list on your audio device
device
then pair again. Refer to your device operating instructions for information
about how to do this..

Care and Cleaning

• Always disconnect the product from the power supply before cleaning it.
• Never use aggressive detergents, rubbing alcohol or other chemical solutions, as these
may damage the casing or cause the product to malfunction.
• Use a dry, lint-free cloth to clean the product.
• Do not immerse the product in water.

Declaration of Conformity (DOC)

Conrad Electronic SE, Klvus-Conrad-Straße 1, D-92240 Hirschau hereby declares that this
product conforms to the 2014/53/EU directive.
Click on the following link to read the full text of the EU declaration of conformity:
www.conrad.com/downloads
Select a language by clicking on a flag symbol and enter the product order num-
ber in the search box. You can then download the EU declaration of conformity in
PDF format.
Disposal
Electronic devices are recyclable waste and must not be placed in household waste.
Always dispose of the product according to the relevant statutory regulations.
You thus fulfill your statutory obligations and contribute to the protection of the envi-
ronment.

Technical Data

a) Speaker
Input voltage / current ................... 5 V/DC, 1 A via USB type A
Output power ................................ 6 W
Material ......................................... ABC plastic housing, iron speaker grille
Driver unit ..................................... 63.5 mm (2.5") 4 Ω 3 W (each speaker)
Frequency response ..................... 60 Hz - 20 KHz
Bluetooth name ............................ RF-SPKR-100
Connectivity .................................. AUX in 3.5 mm jack (stereo)
Bluetooth 5.0
Transmission distance .................. <12 m (open area)
Transmission frequency range ..... 2404 - 2476 MHz
Transmission power...................... 4 dBm
Operating/storage conditions ........ -20 to +60 ºC, <80 % RH (non-condensing)
Cable lengths ................................ 110 cm (3.5 mm audio input)
110 cm (USB type A power input),
79 cm (speaker connection)
Dimensions (W x H x D) ............... 80 x 157 x 90 mm
Weight .......................................... 0.82 kg (without adaptor)
b) Power Adaptor
Input voltage/current ..................... 100 – 240 V/AC, 0.25 A, 50/60 Hz
Output voltage/current .................. 5 V/DC, 1 A
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com). All rights in-
cluding translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication
represents the technical status at the time of printing.
Copyright 2020 by Conrad Electronic SE. *2162591_v2_0520_02_dh_m_en