Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Audio streaming
Audio streaming is the transmission of audio data (music) via Bluetooth
If you own an A2DP-capable Bluetooth
via the pairing procedure as described above and establish an audio transmission.
• Make sure that both devices were connected via pairing.
• Start playback/audio transmission on your Bluetooth
ing operating manual).
• Now audio transmission is activated.
• You can now control the playback of your Bluetooth
control panel of the loudspeaker:
"Volume down" button (1) decreases the volume
"Volume up" button (3) increases the volume
PLAY/PAUSE button (4) pauses playback and resumes playback when pressed
again.
Audio playback with cable connection
If your audio device does not have a Bluetooth
also be connected to the loudspeaker using the stereo cable provided.
• Insert the large plug of the stereo cable provided into the audio output (headphones
socket) of your audio device.
• Insert the small plug of the stereo cable into the AUX socket (5) of the loudspeaker.
• The ring around the operating buttons turns red in this operating mode.
• Start playback on your audio device.
• You can only operate your audio device as described in "Audio Streaming".
Hands-free mode
The speaker can also be used as a hands-free device for a mobile phone.
• Make sure that both devices were connected via pairing.
• Press the phone button (2) to accept an incoming call and to hang up.
• Speak into the microphone MIC at the top of the loudspeaker.
Operation as power station
The charging station of the loudspeaker can also supply power to other devices (e.g.,
mobile phones, MP3 players, etc.) that are charged or operated through a USB con-
nection.
The integrated rechargeable battery should be fully charged.
To do this, the loudspeaker does not need to be placed on the charging station.
• Connect the device to be charged with the USB connection of the charging station.
• Move the switch on the charging station to the position PS (=power station).
• The LED at the charging station flashes green in this operating mode.
Maintenance and Cleaning
The BT loudspeaker and the charging station are maintenance-free.
Only clean them with a slightly moistened cloth. Never use cleaning agents as these
can damage the surface of the casing.
Disposal
Electronic devices are recyclable and must not be disposed of in the house-
hold waste!
Please dispose of the product, when it is no longer of use, according to the
current statutory requirements.
to the speaker.
®
device, you can connect it with the speaker
®
device (see the correspond-
®
device with the buttons on the
®
audio transmission function, it can
®
Technical Data
Operating voltage................................................5 V/DC (via USB)
Integrated rechargeable batteries ..................LiPo battery 3.7 V/500 mAh (loudspeaker)
................................................................................
Operation time with one battery charge .........up to 10/200 h (operation/standby)
Power output .......................................................2 W RMS
Bluetooth
version ..............................................V2.1 + EDR
®
Range ....................................................................approx. 10 m
Dimensions...........................................................62 x 68 mm (loudspeaker)
................................................................................83 x 20 mm (charging station)
Weight ...................................................................280 g (loudspeaker)
................................................................................70 g (charging station)
Declaration of Conformity
We, Conrad Electronic, Klaus-Conrad-Straße 1, 92240 Hirschau, hereby declare that
this product adheres to the fundamental requirements and the other relevant regula-
tions of Directive 1999/5/EC.
You can find the Declaration of Conformity for this product at www.conrad.com.
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication represent
the technical status at the time of printing.
© Copyright 2015 by Conrad Electronic SE.
LiPo rechargeable battery 3.7 V/1020
mAh (charging station)
Werbung
Inhaltsverzeichnis
