B) Stand-Alone Installation And Wall Mounting - Renkforce TB230 Bedienungsanleitung

b) Stand-alone installation and wall mounting

You can choose to install the TV soundbar on a TV shelf (option A) or to a wall (option B). The choice of
installation method depends on the current position of your TV.
Option -
Do not cover the TV soundbar with tablecloths or similar objects. The product could otherwise
become very hot during use and cause fire, damage or injury.
Stand-alone installation (option A)
• Place the TV soundbar on a stable and horizontal surface.
• Make sure that there are no magnetic sources such as speakers in the near proximity.
Wall mounting (option B)
When drilling installation holes or tightening screws, make sure not to damage any existing
cables or pipes (e.g. water pipes).
Caution! The installation must be carried out by a qualified expert. Improper installation can
cause hazards to you and other persons! If you do not have the relevant expert knowledge,
do not install the product yourself, but have it done by a professional.
Make sure the installation location is sufficiently stable and secure to withstand the product.
Caution! Do not over-tighten screws. Over-tightening screws can cause instability.
• Remove the screws (16) on the rear side of the TV soundbar.
• Use the screws that you had just removed to attach the wall
brackets to the rear side of the TV soundbar. Use a suitable
Phillips screwdriver.
A O ption - B
29