O.contracture Footrest; Z-Finity Footrest System - Sunrise Medical Quickie IRIS Benutzeranweisungen

E NG LIS H
O. CONTRACTURE FOOTREST
1. Outside Mount -
Can be mounted laterally
2. Inside Mount -
Can be mounted in the center.
18
3. Height Adjustment
a. Loosen and remove the retaining bolt (A) in the footrest mounting bracket.
b. Slide the lower tube upward or downward to the desired position until
predrilled holes on hanger tubes are aligned.
c. Reinsert bolt (A) and tighten.
4. Footrest Angle Adjustment
a. Loosen the retaining bolt (B) in the adjustment locking joint.
b. Position footrest foreword or rearward in desired angle.
c. Retighten the bolt (B).
5. Footplate Angle Adjustment
a. Loosen the retaining bolt (C) in the footplate locking joint.
b. Position footplate upward or downward in desired angle.
c. Retighten the bolt (C).
P. Z-FINITY FOOTREST SYSTEM
CAUTION– The Z-FINITY
™
T
NOTE –
1. Footrest/Footplate positioning using the rotational clamp
R
T C
2. Footrest positioning using footplate spacers
R
S
R
3. Height range adjustment (Direct Mount Footrest)
A
T
4. Height range adjustment (Extension Mount Footrest)
S
T
MK-100151 Rev. D
16 17 18
16
17
18
18
Footrest system is rated to 165lbs (75kg)
S
T
A D
DO NOT E CEED
E
IX. DEALER SERVICE & ADJUSTMENT
24
D
16
18
19
20
21