Personal Safety - Cocraft HMD 150 Bedienungsanleitung

3) Personal safety

a) Pay attention to what you are doing and use common sense when using
power tools. Never use power tools if you are tired or under the influence of
drugs, alcohol or medication. One moment of inattention while using a power
tool may result in serious injury.
b) Use protective equipment. Always wear eye protection. Using protective
clothing such as dust masks, non-slip safety shoes, helmets and ear defenders
when needed decreases the risk of injury.
c) Avoid accidental starts. Make sure that the power switch is set to OFF before
plugging the tool into a wall socket. Never carry a power tool with your finger on
the trigger and never connect the power tool to a wall socket when the switch is
set to ON, since it may result in injury.
d) Remove all service tools/keys before switching the power tool on. A service
tool left on a rotating part of the power tool may result in personal injury.
e) Do not overreach. Keep proper footing and balance at all times. This will allow
you to have more control in unexpected situations.
f) Wear suitable attire. Do not wear loose-fitting clothing or jewellery. Keep hair,
clothes and gloves away from moving parts. Loose-fitting clothes, jewellery or
long hair could become caught in moving parts.
g) If equipment for dust extraction or collection is available, make sure that it
is connected and used properly. The use of such equipment can significantly
reduce dust-related hazards.
4) Use and maintenance of the power tool
a) Do not force the power tool. Use a power tool designed for the work you are
about to perform. The correct power tool will do the job better and safer if used
at the rate for which it was designed.
b) Never use the power tool if the power switch does not switch the tool on
and off properly. Any power tool that cannot be controlled by the power switch is
dangerous and must be repaired.
c) Unplug the lead from the wall socket, before making any adjustments,
changing accessories or storing the power tool. These precautions reduce
the risk of the power tool starting unexpectedly.
d) Store any power tools that are not being used out of children's reach. Do not
allow people who are unfamiliar with the tool or its functions to operate the tool.
Power tools can be dangerous if they fall into the hands of inexperienced users.
e) Maintaining power tools. Check for any incorrect settings, parts that catch,
broken parts or anything else which may cause the power tool to malfunction.
If something is damaged, have the power tool repaired before use.
Many accidents are caused by poorly maintained power tools.
f) Keep tools sharp and clean. Properly maintained cutting tools with sharp cutting
edges are less likely to bind and are easier to control.
g) Use the power tool, accessories and similar in accordance with these
instructions and in an appropriate way suitable for the type of power
tool used, taking into account the working conditions and the work to be
performed. Using the power tool for a purpose other than that for which it is
intended could result in a dangerous situation.
4