General Safety Instructions; Electrical Safety - Cocraft HMD 150 Bedienungsanleitung

150 W Mini Grinder
Art.no 18-3579
40-9526
Please read the entire instruction manual before using the product and then save it for
future reference. We reserve the right for any errors in text or images and any necessary
changes made to technical data. In the event of technical problems or other queries,
please contact our Customer Services (see address details on the back).
Safety

General Safety Instructions

Warning: Read all the instructions carefully before use. Failure to adhere to the following
instructions may lead to electric shock, fire or serious injury. The term "power tool" in
the following text refers to your handheld mains operated or battery operated tool.
Save this instruction manual for future reference.
1) Work area safety
a) Keep the work area clean and well illuminated. Cluttered and poorly lit areas
invite accidents.
b) Do not use power tools in explosive environments, e.g. near flammable liquids,
gases or dust. Power tools generate sparks that can easily ignite dust or fumes.
c) Keep children and other bystanders away from the area where you are using
the power tool. Distractions can cause you to lose concentration and control.

2) Electrical safety

a) The plug of the power tool must fit correctly into the wall socket.
Never modify the plug in any way. Never use an adaptor plug together with
earthed power tools. The use of suitable wall sockets and plugs which have not
been modified in any way reduce the risk of electric shocks.
b) Avoid physical contact with earthed objects, such as pipes, radiators, ovens
or refrigerators. There is an increased risk of electrical shock if your body is earthed.
c) Do not expose the power tool to rain or other wet conditions. Water entering
a power tool will increase the risk of electric shock.
d) Do not abuse the mains lead. Never use the lead to carry/drag the tool or to jerk
the plug from a wall socket. Keep the lead away from heat, oil, sharp edges and
moving parts. Damaged or tangled leads increase the risk of electric shock.
e) When using a power tool outdoors, use an extension lead that is suitable for
this purpose. The use of an extension lead designed for outdoor use decreases
the risk of electric shocks.
f)
If for some reason you must use a power tool in a wet environment, always
connect it to the mains via an earth-fault circuit breaker such as an RCD (residual
current device). Use of an RCD significantly reduces the risk of electric shock.
Model S1J-YJ11-10
S1J-YJ11-10
3