Cocraft HMD 150 Bedienungsanleitung Seite 10

Fig. Accessory specification
14 Orange grinding stone,
120 grit, aluminium oxide
15 Grey grinding stone,
120 grit, silicon carbide
16 Mandrel for Ø 6.4 and
12.7 mm sanding drum
17 Mandrel for accessories
with arbor holes,
Ø 1.6 × 8 mm screw
18 Threaded mandrel
19 HSS drill bits, Ø 1.6 and 3.2 mm
20 Drum sanding bands, 60/120 grit
aluminium oxide, Ø 6.4 and 12.7 mm
21 Cutting wheels Ø 24 × 0.8, 0,6,
0,4 mm, hole Ø 1.6 mm
22 Fibreglass reinforced cutting wheels
Ø 31.8 × 1.3 mm, hole Ø 1.6 mm
23 Pink, aluminium oxide grinding
stone, 220 grit, Ø 20 × 3.5 mm,
hole Ø 2.2 mm
24 Silicon carbide sharpening stone
25 White felt polishing points for
threaded mandrel
26 Polishing compound
27 Chuck collet for accessories with
Ø 1.6, 2.4 and 3.2 mm shank/arbor
Shank Ø Applications
3.2 mm Grinding ferrous metals
3.2 mm Grinding non-ferrous
materials such as stone
and ceramics
3.2 mm Sanding drum, 60/120 grit
aluminium oxide, grinding
wood and fibreglass
3.2 mm For unmounted
accessories with Ø 1.6 mm
arbor holes
3.2 mm For soft accessories with
arbor holes such as cloth
polishing wheels
Drilling into wood, plastic
and soft metals
Sanding and shaping wood
and fibreglass
For use with a 1.6 mm
mandrel. Solely for cutting
off plastic, wood and metal
For use with a 2.2 mm
mandrel. Solely for cutting
off plastic, wood and metal
Grinding and polishing
ferrous metals
Cleaning grey and pink
grinding stones
Polishing plastic and metal
For removing scratches
and burs on metals,
ceramics and precious
stones
10
RPM
9000–
35000
9000–
35000
4500–
26000
4500–
35000
4500–
26000
4500–
35000
4500–
35000
9000–
35000
4000–
20000
4500–
11000