LD Systems AM 8 Bedienungsanleitung Seite 14

1
CHANNELS
Overview of the input channels (CHANNEL 1 - 8) and the line outputs (MASTER 1 & 2).
2
EQ
Equalizer setting for the input channels and channel groups (GROUP 1-5).
3
MATRIX
Individual routing for the input channels (CHANNEL 1 - 8) and the line outputs (MASTER 1 & 2).
4
SYSTEM
Set threshold for activation of a channel (THRESHOLD), hold time (HOLD TIME) and gain limits, panel lock (PANEL LOCK), configuration as a
master or slave unit (DEVICE MODE), maximum number of open channels (MAX. OPEN CH), IP address (DEVICE IP), password administration
(USER), global presets and to reset the unit (FACTORY SETTINGS).
5
MENU
Saving and recalling user settings (SAVE FILE / OPEN FILE), connecting and disconnecting a connection (CONNECT / DISCONNECT), managing
the channel group (GROUP) and exiting the program (EXIT).
6
CONNECTION ON / OFF
If the "ON" button is highlighted in yellow, the connection between automixer and computer is established. If the "OFF" button is highlighted
in yellow, the connection between automixer and computer is severed.
7
SINGLE / GROUP 1 - 5
Showing the input channels that are not associated with a channel group (SINGLE), and showing the channel groups (GROUP 1-5).
8
CHANNEL 1 - 8
By double-clicking, the name of the channel can be changed individually.
9
EQUALIZER
Graphical representation of the equalizer setting and button to access the 5-band parametric equalizer of the input channels 1 to 8 or 15-band
parametric equalizer of the output channels Master 1 and 2 (single click with the left mouse button).
10
LINE / MIC CHANNEL 1 - 8
Switching the input channels from line to microphone sensitivity and vice versa (single click with the left mouse button). The yellow-highlighted
button shows the option currently active.
11
LINE / MIC MASTER 1 & 2
Switching the output level of the line outputs Master 1 and Master 2 (single click with the left mouse button). The blue-highlighted button
shows the option currently active (LINE = output signal with line level, e.g. for the line input of a power amplifier / MIC = output signal level
attenuated by 20 dB, for example for the microphone input of a mixer).
12
ACTIVE / WAITING
The yellow-highlighted "ACTIVE" button indicates which of the input channels is activated. If a channel is not activated, the message "WAITING"
is greyed out on the screen. By activating the priority function, the corresponding channel is activated permanently.
13
LEVEL METER CHANNEL 1 - 8 / MASTER 1 & 2
The level meters for the input channels 1 to 8 and the line outputs Master 1 and 2 provide a clear overview of the levels.
14
PRIORITY
Button for the priority function of the input channels. By clicking on the "PRIORITY" button, the corresponding channel is given priority over
the other channels. The button will change its colour to yellow. By re-clicking on "PRIORITY", the priority function is disabled.
14