Fitting The Harness; Switching On; Switching Off - Stihl FSE 60 Gebrauchsanleitung

Fitting the Harness

A shoulder strap is available as a special
accessory.
Wear the shoulder strap over your left
shoulder and adjust its length so that the
spring hook lies against your right hip.
The open side of the hook should face
away from your body. Attach the spring
hook to the carrying ring (see "Main
Parts").
FSE 60, FSE 71, FSE 81

Switching On

1
2
N
Make sure you have a secure and
balanced footing.
N
Hold your trimmer with both hands –
right hand on the control handle –
left hand on the loop handle.
N
Stand upright – hold the trimmer in a
relaxed position and always on right
side of your body.
N
The cutting attachment must not
touch the ground or any other
objects.
N
Press down the starting lockout
lever (1) and hold it in that position.
N
Squeeze the trigger switch (2).

Switching Off

N
Release the trigger switch and
starting lockout lever.
Note that the cutting attachment
continues to run for a short period
after you let go of the throttle
trigger and starting lockout lever –
flywheel effect.
During longer work breaks – disconnect
the plug from the power supply.
When the machine is not in use, shut it
off so that it does not endanger others.
Secure it against unauthorized use.
English
41