Inhaltsverzeichnis
Werbung
English
4.2
Start/end operations settings - start period
start
00:00
4.3
Start/end operations settings - start period
start
00:00
4.4
Start/end operations settings - start period
start
00:00
4.5
Start/end operations settings - start period
start
00:00
4.6
Start/end operations settings - start period
start
00:00
5.
Display and reset of partial counters - counter selection
CONTATORI SELEZIONI
The following message will be displayed:
number of selection
press a key
If any one of the distribution keys are pressed (coffee, cappuccino,
milk, hot water or steam), the number of distributions made with that
key will be displayed. For example:
number of selection
000106
period
wed
24:00
period
thu
24:00
period
fri
24:00
period
sat
24:00
period
sun
24:00
(Wednesday)
To program the activate and duration time for Wednesday follow the
procedures in Paragraph 4.
(Thursday)
To program the activate and duration time for Thursday follow the
procedures in Paragraph 4.
(Friday)
To program the activate and duration time for Friday follow the
procedures in Paragraph 4.
(Saturday)
To program the activate and duration time for Saturday follow the
procedures in Paragraph 4.
(Sunday)
To program the activate and duration time for Sunday follow the
procedures in Paragraph 4.
How to perform other operations
When the FRAME DISPLAY (31) key is pressed, the message “counter
selection” is displayed (See Paragraph 5).
If the displayed key is kept depressed and any one other distribution
key is pressed, the counter of this key will be reset and the following
displayed:
number of selection
000000
To display and reset the counters of the other distribution keys, repeat
the above procedures.
N.B. To obtain the exact number of coffee cups distributed, the 2-
coffee cup key counters (27 and 29 of each distribution group) must be
multiplied by 2.
How to perform other operations
When the FRAME DISPLAY (31) key is pressed, the message “no. of
coffees” is displayed (See Paragraph 6).
English
Werbung
Inhaltsverzeichnis
