Inhaltsverzeichnis
Werbung
English
2.
Programmazione
2.
Programming
*
components test
*
user programming
*
cappuccino delivery
*
clock
*
softener check
water hardness: 05 F
*
softener check
liters of resins:
*
language selection
italian
yes
yes
yes
4
4
04 lt
Cheks the correct functioning of each component with the display of
the name of the component activated:
“hot water solenoid valve” press the hot water delivery key (13a).
“cappuccino solenoid valve” press the milk delivery key (16).
“x group solenoid valve” press the coffee delivery key (26) of each
distributor group.
“pump” press the coffee delivery key (27) of the group on the right.
“auto-level solenoid valve” press the coffee delivery key (28) of the
group on the right.
“e.v. steam” press automatic steam key (12).
“Yes” activates, “no” deactivates the user programming function. To
select “yes” or “no” use the “+” (34) and “-“ (35) keys.
“Yes” activates, “no” deactivates the cappuccino function. To select
“yes” or “no” use the “+” (34) and “-“ (35) keys.
When the cappuccinofunction is active, the group on the left distributes
milk and coffeee simultaneously.
“Yes” activates, “no” deactivates the clock function. To select “yes” or
“no” use the “+” (34) and “-“ (35) keys.
Perform the test to detect the hardness of the water, then set the value
obtained using the "+" (34) or "-"(35) keys. The reading will be changed
by 5 units at a time.
N.B.: If the value of the hardness of the water is set to "00", the
warning functions is deactivated. This condition must be set
when the automatic softener is used.
If the key
(33) is pressed, the second message relative to the
4 4 4
water softener is displayed.
After having obtained the water softener data, set it on the display
using the "+" (34) and "-" (35).
N.B.:The maximum value possible is 20 litres.
Use the "+" (34) or "-"(35) keys to select the desired language for the
displayed message. The following languages are avaible: Italian,
English, French.German and Spanish.
English
Werbung
Inhaltsverzeichnis
