English
3.
Date and time setting - clock program
CLOCK PROGRAM
N.B. This is displayed only if the CLOCK function is activated.
The following message is displayed:
clock setup
monday
The day (e.g. Monday) flashes.
Press the + (34) and - (35) keys until the correct day is displayed.
Press the 4 4 4 (33) key , the hours will flash (e.g. 07). Using the + (34)
and - (35) keys, change the numbers until the correct time is displayed.
4.
Start/end operations settings - start period
START PERIOD (MONDAY)
N.B.: Only displayed if CLOCK function is activated
The following message is displayed:
start
07:30
The activation hour (e.g. 07) flashes.
Press the + (34) and - (35) keys until the correct activate hour for
Monday is displayed.
N.B. If the + (34) and - (35) keys are kept depressed, the hours
number changes at a greater speed.
When the key
(33) is pressed, the minutes of the switch-on time
4 4 4
will flash on the display (e.g. 30). Using the "+" (34) and "-" keys (35) this
figure can be changed to show the corresponding minutes of the desired
switch-on time.
N.B. If the + (34) and - (35) keys are kept depressed, the minutes
number changes at a greater speed.
When the key
(33) , tis pressed, the hour of the operation time will
4 4 4
flash on the display (e.g. 16). Using the "+" (34) and "-" keys (35) this
figure can be changed to show the corresponding hour of duration for
Monday.
4.1
Start/end operations settings - start period
start
00:00
07:00
period
mon
16:30
period
tue
24:00
N.B. If the + (34) and - (35) keys are kept depressed, the hours
number changes at a greater speed.
Press the 4 4 4 (33) key, the minutes will flash (e.g. 00). Using the +
(34) and - (35) keys, change the numbers until the correct minutes is
displayed.
N.B. If the + (34) and - (35) keys are kept depressed, the minutes
number changes at a greater speed.
How to perform other operations
When the 4 4 4 (33) key is pressed, the day will once again be displayed
(if this needs to be changed, follow the above procedures).
When the FRAME DISPLAY (31) key is pressed, the message duration
activate is displayed (See Paragraph 4).
(Monday)
N.B. If the + (34) and - (35) keys are kept depressed, the hours
number changes at a greater speed.
When the key
(33) tis pressed, the minutes of the operation time
4 4 4
will flash on the display (e.g. 30). Using the "+" (34) and "-" keys (35) this
figure can be changed to show the desired number of minutes.
N.B. If the + (34) and - (35) keys are kept depressed, the minutes
number changes at a greater speed.
Examples
1) When the set day (e.g. Monday) corresponds to the closing day, set
the activation time to 00:00 and the duration to 00:00.
2) If the machine needs to remain on at all times, set the time of
activation to 00:00 and the duration to 24:00.
3) If the machine needs to be switched on at 07:30 and switch off at
midnight, set the activation time to 07:30 and the duration to 16:30.
How to perform other operations
When the key
(33) is pressed, the activation time will once again
4 4 4
be displayed (if this needs to be changed, follow the above procedures).
When the FRAME DISPLAY (31) keyis pressed, the message activate
duration for the next day is displayed (See Paragraph 4.1).
(Tuesday)
To program the activate and duration time for Tuesday follow the
procedures in Paragraph 4.
English