Siemens SINUMERIK 840D sl Inbetriebnahmehandbuch Seite 42

Anlagennetz konfigurieren
2.3 TCU inbetriebnehmen
# PING TRANSMISSION PERIOD
# Period in minutes, in which transmission data will be sent
PingTransmissionPeriod=2
# PING TRANSMISSION INTERVAL
# Time-interval in seconds between two pings
PingTransmissionInterval=5
[externalTcu]
# EXTERNAL TCU IP-ADDRESSES
# List of accepted TCUs in IP-V4-format (index 1 to maximal 16)
ExternalTcuIP_1=
[TCU_HWSService]
# TCU CONNECT TIMEOUT
# Guaranteed time period (in sec) the HMI manager waits
# for TCUs recognized as connected TCUs by the TCU_HWS
# service.
TCUConnectTimeout=30
# TCU CONNECT TIMEOUT FOR HEADLESS STARTUP
# Guaranteed time period (in sec) the HMI manager waits
# for TCUs recognized as connected TCUs by the TCU_HWS
# service, if a PCU panel doesn't exist and no TCUs are
# connected till now. This time period is effective ad-
# ditionally to the time period TCUConnectTimeout.
HeadlessTCUConnectTimeout=60
Hinweis
Externer VNC Viewer
Voraussetzung für den Einsatz von mehr als 1 externen VNC Viewer ist die Option
"Bedienen ohne SINUMERIK OP".
Siehe auch
SNC: "TCU mode" konfigurieren (Seite 59)
42
Bedienkomponenten und Vernetzung (IM5)
Inbetriebnahmehandbuch, 02/2011, 6FC5397-1AP40-0AA0