Settings And Operation; Setting The End Points - RADEMACHER RolloTron Montage- Und Bedienungsanleitung

9. Settings and operation

9.1 Setting the end points

The end points must be set in order for the roller shutter to stop
just before the upper and lower end point.
i
It is imperative that both end points are set, other-
wise malfunctions may occur.
If the RolloTron DECT is operated without an end
point setting, the drive will continue to run for as
long as one of the two control buttons is actuated.
If the end point setting is not configured, the favour-
ite position function and DECT travel commands are
not available.
63