Installation And Connection; Transport The Appliance; Set Up Appliance - Salvis ProfiLine Griddle Plate Betriebsanleitung

10.

Installation and connection

● Please observe the local kitchen regulations.
● Installation work must be carried out in accordance with the manufacturer's assembly instructions
and in accordance with accepted technical regulations.
● Let Customer Service install the appliances and provide instruction.
● Observe the safety instructions from page 5 Chapter 2.
10.1

Transport the appliance

● Note the weight of the appliance.
. Transport the appliance using suitable transport equipment or lift truck.
10.2

Set up appliance

Setup
‒ horizontally and vibration free,
‒ under an extraction hood with flame-retardant filters,
‒ not on flammable surfaces and walls.
● There must be no potentially explosive or flammable material in the vicinity of the appliance, e. g.
fuel, grease etc.
● Do not set up the appliance under a sprinkler system!
● Make sure that there is sufficient free space above the appliance! There must be no shelves or
moveable swivelling equipment above the appliance that could be pivoted over the appliance!
● Caution hot combustion gases! Maintain a minimum distance of 1 metre above the appliance. no
objects or devices must be stored or installed above the appliance!
● The appliance must only be operated in a sufficiently ventilated room. Damage to health through
combustion products can only be prevented with sufficient ventilation.
● Routing of the ventilation systems must be carried out by the appropriate specialists.
● Make sure that there is sufficient area for movement to operate the appliance! Also that there is
no risk of inadvertent impact with persons when handling the appliance. The free area for move
ment in front of the appliance should be a minimum width of one meter!
. Remove protective film from appliance. Remove residual adhesive with cleaner or benzene.
en
41 / 48