Type Key; Technical Data; Motor Data; Installation - SystemAir Multibox MUB EC 025 315 Montage- Und Betriebsanleitung

GB
Table 4 Name plate description
1
Type designation
2
Voltage / Current /
Frequency
3 Power output
4
Protection class
5.5

Type key

MUB EC
Multibox
5.6

Technical data

Table 5 Technical data
Temperature range [°C] medium
Voltage / Current
Protection class
Sound pressure at 1m [dB(A)]
Dimensions
Weight
Rotor diameter
Note:
Further technical data can be found on the data sheet of your fan.
5.7

Motor data

The motor data can be found on the nameplate of the motor or in the technical documents of the motor manufacturer.
6

Installation

6.1

Safety information / Preconditions

♦ Installation may only be carried out by adequately qualified persons, details see Table 1 Qualifications, page 6.
♦ For all work in the vicinity of the fan, wear protection equipment, details see 2.3 Personal protective equipment,
page 6
♦ Local conditions, regulations and laws must be observed and respected.
♦ Abide by the system-related conditions and requirements of the system manufacturer or plant constructor.
♦ Safety elements may not be dismantled, circumvented or put out of function.
Warning
Danger from falling fan or parts of the fan!
♦ Check the surface before installation for load bearing capacity.
♦ When selecting the hoisting equipment and fitting material, observe the weight, tendency to vibrate and
shear forces (weight information on the name plate).
315291 | 001
5
6
7
025
Size Impeller Diameter
-20 up to 60 (This is the maximum range. For the
temperature range of your fan, please check the data
sheet.)
see name plate
see name plate
46...75
see this document or our online catalogue
see name plate
see name plate
Insulation class motor
Article number / Production number /
Manufacturing date
Certifications
315
Motor type
11
Installation |
EC