Wall And Ceiling Assembly - SystemAir Multibox MUB EC 025 315 Montage- Und Betriebsanleitung

GB
1
1
Weather protection roof (WSD)
2 Cap nut
3
Double facetten
6.2.6

Wall and ceiling assembly

Warning
Danger from falling parts!
♦ Check the surface before installation for load bearing capacity.
♦ When selecting the hoisting equipment and fitting material, observe the weight, tendency to vibrate and
shear forces (weight information on the name plate).
♦ Wear a helmet and protective goggles.
♦ Seal the contact surface between the base frame and the base or surface with cellular rubber or a foamed band.
♦ In order to avoid vibration transmissions, please use vibration dampers. For example article #37324 in our accessory
program.
♦ Fit the fan on a firm base with suitable fitting material.
♦ Install connecting ducts and accessories.
315291 | 001
Fig. 4 Weather protection roof
4
5
6
Double facetten
Distance bold
Clinch nut
15
Installation |
2
3
4
5
6