Working with the high pressure nozzle
The spray angle is essential for the effec-
tiveness of the high pressure ray. Normally
work is performed with a 25° flat ray nozzle
(included).
Recommended nozzles are deliverable
as accessories
For strong contaminations
–
0° full ray - nozzle
For sensitive surfaces and light contam-
–
inations
40° flat ray - nozzle
For thick layered, persistent contamina-
–
tions
Dirt grinder
Nozzle with adjustable spray angle, for
–
adaption to different cleaning tasks
Angle-Vario-Nozzle
Recommended cleaning method
Loosen the dirt:
–
Spray detergent economically and let it
work for 1...5 minutes but do not let it
dry up.
Remove the dirt:
–
Spray off loosened dirt with the high-
pressure jet.
Operating with cold water
Removal of light contaminations and clear
rinse, i.e.: Gardening tools, terrace, tools, etc.
Set operating pressure according to
need.
Set temperature regulator to "0".
Operating with hot water
Danger
Scalding danger!
Set temperature regulator to desired
temperature.
We recommend the following cleaning tem-
peratures:
Light contaminations
–
30-50 °C
Contaminations containing protein, i.e.
–
in the food processing industry
max. 60 °C
30
Vehicle cleaning, machine cleaning
–
60-90 °C
Operating with steam
Danger
Scalding danger! When operating with tem-
peratures above 98 °C, the operating pres-
sure must not exceed 3.2 MPa (HDS 1195:
2.8 MPa) .
Therefore the following measures must
definitely be performed:
Replace high pressure nozzle (stain-
less steel) with steam nozzle (brass,
order see specification).
Open up the pressure/ quantity regula-
tor on the hand spray gun completely,
direction + until stop.
Set the operating pressure on the appli-
ance to the minimum value.
Set temperature regulator to min. 100
°C.
Danger
Scalding danger!
We recommend the following cleaning tem-
peratures:
De-preserve, contaminations contain-
–
ing strong fat contents
100-110 °C
De-frosting of surcharge substances,
–
partially facade cleaning
up to 140 °C
After operation with detergent
Set dosing value for detergent to "0".
Set the appliance switch to "I".
Open the hand spray gun and rinse the
appliance for at least 1 minute.
– 7
EN