Checking The Air Pressure; Overload Fuse; Cleaning; Storage - ULTIMATE SPEED UMK 10 C2 Bedienungs- Und Sicherheitshinweise Und Originalbetriebsanleitung

Checking the air pressure

Note: The device does not need to be connected
to the cigarette lighter to test air pressure.
Connect the connection valve
Read the air pressure on the display of the
manometer .
2
Remove the connection valve
(see „Initial use").
Note: The manometer

Overload fuse

In the event of overuse or malfunction the overload
fuse in the cigarette lighter plug
11
protect the device. Replace the fuse after resolving
the reason for the fuse tripping (see Fig. D).
Unscrew the tip of the cigarette lighter plug
and remove the overload fuse
Insert the new overload fuse
tip of the cigarette lighter plug
Never use a fuse with a higher tripping current.
Otherwise, this poses a fire hazard!

Cleaning

Never immerse the product in water or spray it
with water. Risk of injury due to electric shock if
moisture enters the device. Risk of injury due to
electric shock if moisture enters the device.
Do not use cleaners or solvents. These could
damage the product beyond repair.
Keep the vents
3
device clean.
Clean with a damp cloth or a brush.

Storage

Keep the product in a dry and frost-free loca-
tion and outside the reach of children.
Be sure not to kink the power cable
air hose to prevent damage.
9
18 GB/IE
(see „Startup").
7
once more
7
is not calibrated.
2
will trip to
5
.
11
and screw the
11
back on.
5
and the housing of the
and the
4

Disposal

The packaging is made entirely of recy-
clable materials, which you may dispose
of at local recycling facilities. The Green
Dot is not valid for Germany.
Observe the marking of the packaging
materials for waste separation, which
b
a
are marked with abbreviations (a) and
numbers (b) with following meaning:
1–7: plastics / 20–22: paper and fibre-
board / 80–98: composite materials.
The product and packaging materials
are recyclable, dispose of it separately
for better waste treatment. The Triman
logo is valid in France only.
Contact your local refuse disposal au-
5
thority for more details of how to dispose
of your worn-out product.
To help protect the environment, please
dispose of the product properly when it
has reached the end of its useful life and
not in the household waste. Information
on collection points and their opening
hours can be obtained from your local
authority.
Translation of the original
declaration of conformity
We, OWIM GmbH & Co. KG, Stiftsbergstraße 1,
DE-74167 Neckarsulm, GERMANY, hereby de-
clare under our sole responsibility the product mini-
compressor, Model No.: HG02325, Version:
05 / 2017, to which this declaration refers, com-
plies with the standards/normative documents of
2006/42/EG, 2014/30/EU and 2011/65/EU.