Two-Circuit / Three-Circuit Connection - Teka GKST 90 - 35 Gebrauchs- Und Montageanweisung

Parboiling boost
Switch on the cooking zone by means of corresponding
M
cooking zone key . Press the Minus key
cooking level 9. Then switch on the parboiling boost by means
R
of the Plus key . During the parboiling stage, the cooking
N
level display switches continuously between the "A" sign
(parboiling boost) and the cooking level which has been set.
Now you can select the subsequent cooking level 1 - 8. If you
quit cooking level 9 without selecting a subsequent cooking
level from 1-8, then the parboiling boost is shut off
automatically after 10 seconds. The parboiling boost time
depends on the subsequent cooking level which has been
selected. Details are given in the accompanying time chart.
R
If the Plus key is selected after the required subsequent
cooking level has been selected, the parboiling boost time is
adjusted upwards in accordance with the time chart. If the
>
Minus key is pressed after the required subsequent cooking
level has been deselected, the parboiling boost is stopped
beforehand.

Two-circuit / three-circuit connection

Two-circuit / three-circuit connection of the respective cooking zone can only be effected after the corresponding
cooking zone has been activated and switched on.
Select the desired cooking level 1-9. Switch on the second heating element by means of the Multi-circuit key
P
The control lamp of the selected cooking zone lights up. Connect the third heating circuit by pressing the Multi-
Q
circuit key once again. The second control lamp
activated in order to switch off the two-circuit / three-circuit connection. The outer heating circuits are switched off
by pressing the Multi-circuit key
Pot Recognition (PR)
If your range is equipped with Pot Recognition the PR will check whether a metal pot is on the cooking zone after
a cooking level has been selected. If no pot is recognized, a u will appear in the display and the heating element
will remain inactive. If a pot is now placed on the cooking zone within 10 minutes, the heating element will turn
itself on and the selected cooking level will appear in the display. Cooking zones with two-circuit heating or frying
zone will automatically be re-powered, i.e., the PR also recognizes the size of the pot. If no pot is placed on the
cooking zone, the range will turn off after 10 minutes for safety reasons.
The PR recognizes only metal pots. To be able to cook with non-metallic cooking ware, as well, the PR can be
turned off for each cooking zone. To do this, the required cooking zone
selected. Now the Multi-circuit key
can now be done without PR. The two-circuit heating or frying zone can now be re-powered by means of the Multi-
Q
circuit key .
To reactivate PR, turn off the cooking zone. When the cooking zone is turned on again, PR will again be active.
When can Pot Recognition be switched off?
1. When using non-metallic pots.
2. For pots which, because of their size or material, switch on the outer element in the case
of multiple circuit cooking zones without sufficiently covering them.
For safety reasons, turn off the cooking zone after use by means of the Touch-Control, so that the shifting of
pots or setting down of metal objects does not accidentally activate a cooking zone while PR is still turned on.
16
>
and select
P
lights up. The corresponding cooking zone must also be
Q
once again. The control lamps
Q
and then the corresponding cooking zone key
Table of times
PB = Parboiling boost,
time in minutes, seconds
Cooking level
1
2
3
4
5
6
7
8
9
P
are then no longer lit.
M O
must be activated
M
should be pressed. Cooking
PB (min:sec)
01:00
03:00
04:48
06:30
08:30
02:30
03:30
04:30
—:—
Q
.
and a cooking level
224511