Intended Use - WIKA E-10 Betriebsanleitung

1. Important details for your information
1.1 Intended use E-10, E-11:
Use the pressure transmitter with flameproof enclosure to transform pressure into an electrical
signal in gas hazardous areas, zones 1 and 2.
ATEX und IECEx approval
Pressuremeasuring instrument approved for use in gas hazardous areas, type tested in
accordance with the following standards:
EN 60079-0 / IEC 60079-0
■
EN 60079-1 / IEC 60079-1
■
ATEX Approval ratings: Flameproof enclosure II 2G Ex db IIC T6...T1 Gb (KEMA 05 ATEX 2240 X)
IECEx Approval ratings: Flameproof enclosure Ex db IIC T6...T1 Gb (IECEx DEK 15.0048X)
1.2 Knowledge required
Skilled personnel are understood to be personnel who, based on their technical training,
knowledge of measurement and control technology and on their experience and knowledge of
country-specific regulations, current standards and directives, are capable of carrying out the
work described and independently recognising potential hazards.
It has to be acquainted with the rules and regulations on hazardous areas and electric circuits,
since this transducer is „electrical equipment" as defined by EN 60079-14.
Special operating conditions require further appropriate knowledge, e.g. of aggressive media.
WIKA Operating instructions, E-10, E-11
EN
5