WIKA E-10 Betriebsanleitung Seite 17

6. Starting, operation
Specifications
Accuracy
Non-linearity
Non-repeatability
1-year stability
Permissible temperature ranges
Medium and ambient
4)
Storage
Rated temperature range
Temperature coefficients within
rated temperature range
Mean TC of zero
„
Mean TC of range
„
CE conformitiy
Pressure equipment directive
„
EMC directive
„
ATEX directive
„
Ex-protection
Shock resistance
Vibration resistance
WIKA Operating instructions, E-10, E-11
Model E-10 / E-11
% of span
≤ 0.25
≤ 0.5
Including non-linearity, hysteresis, zero point and full scale error (corresponds to
3)
error of measurement per IEC 61298-2).
Adjusted in vertical mounting position with lower pressure connection.
% of span
≤ 0.2
% of span ≤ 0.1
% of span ≤ 0.2
5)
°C T6: -40 ... +60
°C -40 ... +102
°C 0 ... +80
-40 °C only valid, if no seal is inserted.
4)
Sealings from NBR only valid up to max. -30 °C.
Sealings from FPM/FKM only valid up to max. -15 °C.
Pay attention to the sealing material restrictions for G ½ B flush process connection
5)
(next table)
% of span
≤ 0.2 / 10 K
% of span
≤ 0.2 / 10 K
EN 61326 Emission (Group 1, Class B) and Immunity (industrial
locations)
ATEX II 2G Ex db IIC T6...T1 Gb (KEMA 05 ATEX 2240 X)
IECEx Ex db IIC T6...T1 Gb (IECEx DEK 15.0048X)
g 100 according to IEC 60068-2-27 (mechanical shock)
g 10 according to IEC 60068-2-6 (vibration under resonance)
(BFSL)
3)
(BFSL) according to IEC 61298-2
(at reference conditions)
T5: -40 ... +75
EN
T4 ... T1: -40 ... +102
17