Packaging - WIKA E-10 Betriebsanleitung

4. For your safety / 5. Packaging
WARNING
Consider the details given in the EC-type examination certificate and specific
conditions of use as well as the respective country specific regulations for installa-
tion and operation in hazardous areas (e.g.: IEC 60079-14). If you do not observe
these stipulations, serious injuries and/or damage can occur.

5. Packaging

Has everything been supplied?
Check the scope of supply:
Completely assembled pressure transmitters; with flush version E-11 including
■
pre-assembled sealings and plastic protection cap.
Inspect the pressure transmitter for possible damage during transportation.
■
Should there be any obvious damage, inform the transport company and WIKA
without delay.
Keep the packaging, as it offers optimal protection during transportation (e.g.
■
changing installation location, shipment for repair).
Ensure that the pressure connection thread and the connection contacts will
■
not be damaged.
WIKA Operating instructions, E-10, E-11
EN
9