Troubleshooting; Technical Data; Acctiva Professional Flash / Acctiva Professional Flash Ucn / Acctiva Professional Flash Jp - Fronius Acctiva Professional Flash Bedienungsanleitung

Troubleshooting

Nothing on display
(continued)
Cause:
Remedy:
Cause:
Remedy:
Cause:
Remedy:
Charger does not start charging
Cause:
Remedy:

Technical data

Acctiva Professi-
Mains voltage (+/- 15%)
onal Flash /
Acctiva Professional Flash
Acctiva Professi-
Acctiva Professional Flash UCN
onal Flash UCN /
Acctiva Professional Flash JP
Acctiva Professi-
Nominal output max.
onal Flash JP
Charging voltage
Charging current I
Boost mode charging current t
Nominal charging capacity
Number of cells
Duty cycle (I
Charging characteristic
Operating temperature*
Storage temperature
Interface
Climate class (EN50178)
EMC class
Acctiva Professional Flash
Acctiva Professional Flash UCN
Acctiva Professional Flash JP
Protection
Marks of conformity
Weight inclusive of mains and charger leads
Dimensions w x h x d
*
Mains supply interrupted
Connect mains supply
Mains plug or mains cable faulty
Replace mains plug or mains cable
Charger faulty
Contact specialist dealer
Charging terminals or charger lead faulty
Replace charging terminals or charger lead
(M8 nut torque = 15 Nm)
(adjustable)
2
= 50 A) 40°C (104°F)
2
50°C (122°F)
60°C (140°F)
IUoU / IUIoU / IU
If the ambient temperature rises to above 35°C (95°F) or thereabouts (depending on
secondary voltage), the secondary output current is reduced (power derating)
(tI = 30 s, tI = 60 s)
2 max 2 max 2
IEC/EN 61000-6-4/2 (EMC class A)
IEC/EN 61000-6-4 (EMC class A)
19
230 V AC, 50/60 Hz
115 V AC, 50/60 Hz
100 V AC, 50/60 HZ
1080 W
12.0 - 15.5 V
2 - 50 A
max. 70 A
10 - 250 Ah
100 %
50%
20%
0°C to +60°C
32°F to 140°F
-20°C to +80°C
4°F to 176°F
USB
FCC Part 15 (EMC class A)
IP 21
see rating plate
6.5 kg
14.33 lb.
315 x 200 x 110 mm
12.40 x 7.87 x 4.33 in.
6
B