Charging Cable Submenu; Factory Setting - Fronius Acctiva Professional Flash Bedienungsanleitung

Charging cable
submenu
1.
2.
3.
4.
5.

Factory setting

Reset device to factory setting:
1.
2.
3.
Access the submenu
If necessary, change measure (metric/imperial) by pressing the info button:
Set the length of the charger cable. Setting range: 1 to 25 m (3 ft. 3 in. to 82 ft.)
- Press Start/Stop button
- Display flashes. Set the length of the charger cable
- Press Start/Stop button to confirm setting
Set the cross-section of the charger cable.
Setting range: 4 - 6 - 10 - 16 - 25 - 35 - 50 mm
- Press Start/Stop button
- Display flashes. Set the cross-section of the charger cable
- Press Start/Stop button to confirm setting
Press Start/Stop button to exit
„Device resetted" appears for 1 second
Device has been reset to factory setting. The submenu is exited automatically.
(AWG 10 to AWG 1)
2
16