Retrieving Parameters During Charging; Charging - Fronius Acctiva Professional Flash Bedienungsanleitung

Starting charging 2.
manually (deep-
discharge batte-
ry)
(continued)
3.

Charging

1.
2.
Important! The charger automatically switches over to conservation charging after
approx. 1-7 hours, depending on the type of battery. To charge the battery completely,
the battery should remain connected to the charger for this length of time.
3.
Retrieving para- Press the info button to display the parameters in the following sequence:
meters during
charging
Example: current battery
voltage
Ensure charging terminals are connected to correct poles
Starting charging
If there is no confirmation of correct pole connection within 10 secs, the device
reverts to menu mode.
During charging, the number of bars indicates how charging is progressing.
Final charging stage - once the battery is approx. 80-85 % charged
When the battery is fully charged, the charger begins conservation charging.
NOTE! During charging, increased demand for current can lead to a drop in
battery voltage (e.g. switching on additional consumer loads). To compensate
for this, the charger can increase the current briefly to the set device current.
- Display shows 4 bars
- Battery is now ready for use
- All bars are displayed
- The battery is 100 % charged
- Battery is always ready to use
- Battery can remain connected to charger for as long
as required
- Conservation charging counteracts battery self-
discharge
Example: current charging
current
8
Example: ampere-hours
already charged