Preset Submenu (Preferred Settings) - Fronius Acctiva Professional Flash Bedienungsanleitung

PRESET subme-
nu (preferred
settings)
Important! To avoid damage to the in-car electronics, the following modes cannot be
saved:
-
-
1.
2.
3.
PRESET subme- Important! Regardless of the „preferred setting" saved, another mode can be selected
nu (preferred at any time. After disconnecting the charging terminals or mains supply, the device
settings) automatically reverts to the saved „preferred setting".
(continued)
„Refresh wet"
„Refresh GEL"
Access the submenu
From the submenu, select:
Preferred Setting used mode (factory setting):
After disconnecting the charging terminals or mains supply, the last mode se-
lected is saved.
Preferred Setting wet: Save „wet" mode.
After disconnecting the charging terminals or mains supply, the „wet" mode is
saved.
Preferred Setting GEL: Save „gel" mode:
After disconnecting the charging terminals or mains supply, the „gel" mode is
saved.
Preferred Setting FSV: Save „external power supply" mode
After disconnecting the charging terminals or mains supply, the external power
supply mode is saved.
Save the desired mode and exit the submenu.
NOTE! Power failure can influence the charging performance. After a power
failure, check that the desired mode is still set. Correct the mode as required
and restart charging.
15