Comfee SOGNIDORO-09E Bedienungsanleitung Seite 11

Installation
Foam seal C
(Non-adhesive type)
Cut the non-adhesive foam
seal C strip to match the
window height. Insert the foam
seal between the glass and the
window frame to prevent air
and insects from getting into
the room.
Insert the window slider adaptor
into the hole of the window slider.
Security
Bracket
2 Screws
If desired, install the security
bracket with 2 screws as shown.
Type 3: Wall Installation(optional)
-Cut a 125mm (4.9inch) hole into the wall for the Wall Exhaust Adaptor B.
-Secure the Wall Exhaust Adaptor B to the wall using the four Anchors
and Screws provided in the kit.
-Connect the Exhaust Hose Assembly(with Wall Exhaust Adaptor A) to the
Wall Exhaust Adaptor B.
Expansion anchor
position
Wall Exhaust
Adaptor B
Adaptor cap
Note: To ensure proper function, DO NOT overextend or bend
the hose. Make sure that there is no obstacle around the air
outlet of the exhaust hose (in the range of 500mm) in order to
the exhaust system works properly. All the illustrations in this
manual are for explanation purpose only. Your air conditioner
may be slightly different. The actual shape shall prevail.
10
Note: Cover the hole using the
adaptor cap when not in use.
max 120cm or 47 inch
min 30cm or 12 inch