Design And Compliance Notes; Temperature Range - Comfee SOGNIDORO-09E Bedienungsanleitung

Design and Compliance Notes

Design Notice
In order to ensure the optimal performance of our products,
the design specifications of the unit and remote control are
subject to change without prior notice.
Energy Rating Information
The Energy Rating for this unit is based on an installation
using an un-extended exhaust duct without window slider
adaptor or wall exhaust adaptor A (as shown in the
Installation section of this manual)
Unit Temperature Range
Mode

Temperature Range

Cool
17-35°C (62-95°F)
Dry
13-35°C (55-95°F)
Heat(pump heat
5-30°C (41-86°F)
mode)
Heat(electrical
≤
heat mode)
30°C (86°F)
Note:The model MPPFB-11CRN7-QB6 should be
connected only to a supply with the relevant system
impedance no more than 0.373 ohm. Restrictions to
connection may be imposed by the supply authority
on the use of equipment in the actual relevant system
impedance at the interface point on the user's premise
exceeds 0. 373 ohm.
Exhaust hose installation:
The exhaust hose and adaptor must be installed or
removed in accordance with the usage mode.
For COOL,HEAT(heat pump type) or AUTO mode
must be installed exhaust hose.
For FAN,DEHUMIDIIFY or HEAT(electrical heat
type) mode must be removed exhaust hose.
19