MICRO-EPSILON wireSENSOR P115-M Betriebsanleitung Seite 47

Furthermore, the compliance with the following EC Directives and standards is explained, including the valid changes at the time of
this declaration:
- EN ISO 13857:2008 Safety of machinery - Safety distances to prevent hazard zones being reached by upper and lower limbs
- EN 60204-1:2006 Safety of machinery - Electrical equipment of machines
Part 1: General requirements
- DIN EN 61326-1: 2006-10
- DIN EN 61326-2-3: 2007-05
Moreover, we declare that the relevant technical documentation for this partly completed machinery has been created in accordance
with part B of Annex VII, and that we shall be obligated to deliver these upon the request of the market surveillance authorities.
The described partly completed machinery is intended for installation in a production line.
The commissioning of this partly completed machinery shall be prohibited until the partly completed machinery has been installed in a
machine that complies with the provision of the EC Machinery Directive and for which an EC Declaration of Conformity in accordance
with Annex II A is available.
Ortenburg, May 5th 2015 Dr. Thomas Wisspeintner
Managing Director