Tektronix P5210 Anleitung Seite 32

Table 2: Warranted electrical characteristics
DC Common Mode Rejection Ratio
Bandwidth
Gain Accuracy
Maximum rated input voltage
(Refer to Figure 2 on page 13)
probe tip to probe tip
probe tip to earth
3
Temperature
3
Humidity
1
The rating for DC voltage is the same as the rating for RMS voltage.
2
The input voltage must not exceed this peak rating or the RMS rating.
3
Tektronix Design Standard 062-2847-00
P5210 Instructions
> 3000:1 at 500 VDC, 20--30_ C, <70% RH
DC to 50 MHz (--3dB)
± 3% at 20--30_ C, <70% RH
1
4.4 kV , Category I & II
RMS
1 1
1 kV 1 kV , Category III Category III
RMS RMS
2
5.6 kV
(DC + peak AC)
1
2.2 kV , Category I & II
RMS
1
1 kV , Category III
RMS
Operating: 0 to 40_ C
Nonoperating: --30 to +70_ C
Operating: <85% RH at or below +35_ C
Nonoperating: <85% RH at or below
+60_ C
Specifications
21