Control Button - Zeversolar Evershine TL3680 Installationshandbuch

9.1.2 Control button

The inverter has a control button which is necessary to switch between the various
displays for measured values and data, to enter the next entry and to lock the
expected information.
The display menus wrap around, which means that when you arrive at the last entry,
the first entry is displayed when you press the button again.
The inverter provides two languages: English and German.
Press the button for approx. 5s at the entry of "Set Language" to enter the language
menu and select the language. The display will switch to current status information
automatically and the language setting will be saved at the same time unless you
press the button again within approximately 10s.
You can freeze the display as follows:
Press the button for 10s when it shows the information you desire, and do not
release the button until you see "LOCK". The display will show the selected
information until you press the button again or the operating status of the inverter
changes.
To save power, the backlight of the display turns off automatically after 20s. Press
the button again to activate it.
42 Installation and Operating Instructions