Zeversolar Evershine TL3680 Installationshandbuch Seite 16

3. Holding the inverter using the handles on the sides and attach it tilted slightly
downwards to the wall bracket.
4.
Check both sides of the inverter to ensure that it is securely in place
5.
Push in the inverter as far as possible and attach it to both sides of the wall
bracket using the M5 screws and washers
If a second protective conductor is required in your country, ground the inverter and
secure it so that it cannot be lifted off the wall bracket (see section 5.4.3 " Second
protective grounding connection ", page 22).
Installation and Operating Instructions
.
.
15