Establish RS485 communication via network cable as follows:
1.
The network cable consists of eight wires with different colors. Strip the
insulation to reveal the eight wires. Then remove the sharp edges and put them
in order.
2.
The current pin assignment for network cable complies with the EIA/TIA 568
standard. Please refer and apply it for physical implementation as needed.
NOTICE!
The inverter can be destroyed due to incorrect communication wiring.
Internal components of the inverter can be irreparably damaged due to incorrect
wiring between the power wire and signal wire. All warranty claims become void.
Please check the wiring of the RJ45 plug before crimping the contact.
34
Installation and Operating Instructions