9.1.1 Display
The display consists of 16 characters×2 lines. The bottom line always shows the
current output (Pac = xxxx.xW). The top line shows current status by default, it will
switch to different status information by pressing the control button, as follows.
Line 1
State information
E-today
E-total
Vpv
Ipv
Iac
Frequency
Model
Version
Set Language
Vac
Serial No.
Line 2
Pac = xxxx.xW
Installation and Operating Instructions
Daily energy
Energy generated since the inverter was installed
DC input voltage
DC input current
The present output current
Grid frequency
Inverter type
The firmware version
Selected language
Output voltage
Serial number
Current output
41