Zeversolar Evershine TL3680 Installationshandbuch Seite 22

7. Connect individual conductors to the pin connector row by row:
• Insert the grounding conductor (green-yellow) into the screw terminal
the grounding sign and tighten the screw by using a torque of 0.8 to 1Nm using
the POZI-2 tool.
• Insert the neutral conductor N (blue) into the screw
terminal N on the socket element and tighten the screw.
• Insert the line conductor L (brown or black) into the screw
terminal L on the socket element and tighten the screw.
8. Make sure the insulated conductors are securely connected.
9. Push the threaded sleeve (B) onto the socket element (A) until it audibly snaps
into place.
10. Screw the pressure screw (D) tightly onto the threaded sleeve (B) with a torque
of at least 2 - 2.5 Nm. The AC plug has been screwed together. The pressure
screw serves to seal and relieve strain.
11.
Finally, insert the AC plug into the AC pin connector on the inverter.
Installation and Operating Instructions
with
21