Disassembling The Dc Connectors - Zeversolar Evershine TL3680 Installationshandbuch

5.5.3 Disassembling the DC connectors

1. Unscrew the swivel nut.
2. To release the DC connector, insert a flat-blade screwdriver (blade width: 3.5 mm)
into the side catch mechanism and lever it open.
3. Carefully pull the DC connector apart.
4. Release the clamping bracket.Insert a flat-blade screwdriver (blade width: 3.5 mm)
into the clamping bracket and lever it open.
5. Remove the cable.
Installation and Operating Instructions 29