Before First Use - Tescoma Bio exclusive Gebrauchsanleitung

Pressure cooker BIO EXCLUSIVE
Top quality - easy to use - easy maintenance.
Tescoma products - the right choice. Congratulations!
CHARACTERISTICS
The BIO EXCLUSIVE pressure cooker enables cooking at low or high pressure*,
which contributes to preserving the natural taste and nutritional value of meals.
Cooking with the BIO EXCLUSIVE pressure cooker is signifi cantly faster than standard
cooking.
The BIO EXCLUSIVE pressure cooker is made of high-grade 18/10 stainless steel
and high-quality resistant plastics. The handles of the pressure cooker do not burn
if used properly.
The pressure cooker is provided with 3 independent safety cut-outs and a lock
against accidental opening; it is therefore entirely safe to use.
The solid three-layer sandwich bottom has excellent heat retaining properties
that help to economise on energy - cooking is faster and at a low heat output;
the heat may be switched off in advance before the end of cooking.
The Tescoma BIO EXCLUSIVE pressure cooker is suitable for all types of cooker: gas,
electric, vitro-ceramic and induction cookers.
* The operating pressure in the vessel is 0,55 bar during low-pressure cooking.
The operating pressure in the vessel is 0,80 bar during high-pressure cooking.
PRESSURE COOKER DESCRIPTION
1. Operating valve
2. Safety valve
3. Lid
4. Lid handle
5. Open / close button
6. Lock against accidental opening
7. Pressure cut-out - aperture in the rim of the lid
8. Silicone seal
9. Vessel
10. Vessel handle
11. Vessel grip
12. Sandwich bottom

BEFORE FIRST USE

Thoroughly study the instructions for use before fi rst use. Thoroughly wash the
pressure cooker and all its parts with warm water and detergent and wipe dry.
BEFORE EACH USE
Inspecting the valves (Figures A, B, C, D)
Operating valve (1)
Position the operating valve to the end left position (I) and remove it from the handle
by pulling it upwards (Fig. A). Check if the operating valve aperture is clean. If soiled,
fl ush it under running water or clean it using a suitable object such as a thin skewer
etc. (Fig. B). Attach the operating valve back to position after inspecting it.