HomeMatic HM-RC-2-PBU-FM Installations- Und Bedienungsanleitung Seite 31

Device LED feedback
Slow green Configuration
flashing mode (device is
waiting for teach-
in in to the CCU)
Slow orange Teach-in mode
flashing (remote control is
waiting for direct
teach-in to anoth-
er device)
Fast orange Configuration or
flashing teach-in mode
(data being
received)
LED flashing Stage before re-
red slowly setting to factory
settings
60
Wait until the
configuration data
has been sent.
Switch the device
to be taught-in to
teach-in mode.
Wait until the
process is com-
pleted.
Device is waiting
for teach-in
button to be
pressed and held
in order to carry
out a reset, or
for a short button
press to cancel
the process.
LED flashing LED lights up
orange on orange as long
short or long as wireless
button press transmission lasts
and confirmations
have not yet been
received by all
connected devic-
es. Once wireless
transmission
is successfully
completed, the
LED lights up
green for 1 s. If
transmission was
not successful,
it lights up red
for 2 s.
1 s lighting All actuators
up green have confirmed
the (most recent)
bidirectional
command.
2 s lighting At least one
up red actuator has not
confirmed the
(most recent)
bidirectional
command.
Device LED feedback
If transmission
was not success-
ful, please try
again.
You can continue
with operation.
Please try again.
61