Function - Homematic Hm-Rc-2-Pbu-Fm Installations- Und Bedienungsanleitung

Function

When connecting to the device terminals, take
the permissible cables and cable cross
sections into account.
Before connecting the device, remove the fuse
from the fuse box.
3 Function
The HomeMatic Wireless Remote Control is suitable
for installation in flush-mounting boxes installed in the
house.
The device controls taught-in HomeMatic devices
via two radio channels. They can be activated via
a rocker switch which is operated in two directions.
However, HomeMatic devices can be controlled via
direct teaching-in as well as via connections with the
HomeMatic Central Control Unit or a HomeMatic Con-
figuration Adapter. The adapters for different switches
allow you to replace switches made by popular
manufacturers with an intelligent HomeMatic instal-
lation cost-effectively during renovation, or integrate
HomeMatic devices in the design of a new installa-
tion. Using existing or planned switches reduces the
installation costs and work to a minimum. The design,
40
colour and finish of switches that have already been
installed does not change, since existing frames and
rockers can continue to be used.
Function
A Connecting terminals
B Config button
41