HomeMatic HM-RC-2-PBU-FM Installations- Und Bedienungsanleitung Seite 26

Installation
Example for
HomeMatic
Remote Control existing frame
Step 1: Switch off the fuse of the power
circuit.
Step 2: If necessary, pull the rocker off the
frame of the relevant switch.
Then pull the frame off the switch
together with the clamping / retaining
piece. The clamping / retaining piece
can be transparent, grey or black
depending on the manufacturer, and
holds the frame onto the switch.
To make removal easier, a flat, point-
ed object such as a slotted screwdriv-
er can be used.
Step 3: Release the wiring and remove the
existing switch if necessary.
50
HomeMatic
Example for
adapter
existing rocker
Step 4: Connect the phase conductor to
connecting terminal L.
Step 5: Connect the neutral conductor to
connecting terminal N.
Step 6: Secure the HomeMatic flush-mounted
remote control to the flush-mount-
ed box using the provided screws.
Please note that the Config button (B)
of the remote control must be at the
top left during installation.
Step 7: Fit the adapter to the rocker.
Step 10: Switch the fuse of the power circuit
back on again.
Installation
51