Preface; Information On Special Measures; Documentation - KEB COMBIVERT F5 Betriebsanleitung

Preface

4. Preface
The described hard- and software are developments of the Karl E. Brinkmann GmbH. The
enclosed documents correspond to conditions valid at printing. Misprint, mistakes and tech-
nical changes reserved.
4.1

Information on special measures

The used pictograms have following significance:
Danger
Warning
Caution
Attention
Info
For a special case the instructions can be supplemented by additional pictograms and text.
4.2

Documentation

Attention
Step 1
Step 2
4
Is used, when death or serious bodily injury may be the consequence
of non-observance of the measure.
Is used, when bodily injury and/or substantial property damage may
be the consequence of non-observance of the measure.
Is used, when property damage may be the consequence of non-ob-
servance of the measure.
Is used, when noise sensitive or unrequested operation may be the
consequence of non-observance of the measure.
Is used, when a better or simpler result can be the consequence of the
measure.
Documentation via www.keb.de
Prior to performing any work on the unit, it is absolutely necessary to down-
load and read the documentation, especially the safety precautions and in-
structions for use. Follow these steps to get the documentation:
Read the material number (Mat.No.) from nameplate
Input the material number at "www.keb.de => Service => Downloads" and
click "search".
Downloads
Search for specific material numbers
Please enter a comlete (11-digit) material number.
15G6DCD-3510
Search for: search
further on next side