Install Software; Maintenance And Cleaning - VOLTCRAFT Energy Logger 4000 Bedienungsanleitung

Install software

The enclosed analysis program allows a graphic illustration and further processing of the recorded data
of the energy cost measurement device.
Insert the CD supplied in your CD drive.
The installation will start automatically, if the autostart function is active. If this function is not active, select
the „autostart.exe" file in the drive's directory by double-clicking it. The installation starts. An installation
assistant supports you with the installation. You must follow the instructions on the screen.
The operation of the software is given to you in the program under „Help".
Please note that data export as csv- or xls- data is only possible if a version of the Microsoft®-Office
package has been previously installed.

Maintenance and cleaning

General
Apart from occasional cleaning and battery replacements, the measurement device requires no servicing.
The battery change is described below.
Regularly check the technical safety of the device e.g. for damage to the hou-
sing, etc.
Cleaning
Always observe the following safety instructions before cleaning the device:
Live components may be exposed if covers are opened or parts are removed
(unless this can be done without tools).
Before cleaning or repairs, a connected electric device must be disconnected from
the measurement device and the measurement device itself disconnected from the
mains socket.
Do not use any carbon-containing cleaning agents or petrol, alcohol or the like to clean the product. These
could corrode the surface of the measuring instrument. The fumes are furthermore a health hazard and are
explosive. Moreover, you should not use sharp-edged tools, screwdrivers or metal brushes or similar for
cleaning.
To clean the device or the display, use a clean lint-free anti-static and dry cleaning cloth.
34