F) „Forecast" Display For Cost Preview; G) „Time" Display For Time And Date Display; Data Transmission - VOLTCRAFT Energy Logger 4000 Bedienungsanleitung

f) Forecast cost preview display
The cost preview allows establishing by calculation the costs for a
month or the entire year. The calculation can be swithced for tariffs
1 and 2 and is carried out via the two arrow keys (3 and 4).
The already used energy (total in kWh) is used as
the basis of the calculation. This calculated value is
only an idea which represents the possible cause.
Short measurement brakes or changed power pri-
ces can result in deviations. The measurement
device is not approved for balancing purposes.
By pressing the „MODE" key for at least 3 sconds, all displays of „Consumption", „History",
„ON time" and „Forecast" are reset to nill, and the „MEM" memory deleted.
To switch the measurement displays, click the „MODE" (5) key for the next or the „Continue" arrow key
(7) for the previous display. Every time you press, you switch the display.
g) „Time" display for time and date display
The time and date are displayed in the display mode. By pressing the
„max" key (4), the time and date format can be controlled. The dis-
play switches back automatically after approx. 5 seconds to the nor-
mal display.
To switch the measurement displays, click the „MODE" (5) key for the
next or the „Continue" arrow key (7) for the previous display. Every
time you press, you switch the display. After the last display, it starts
again at the „Power1" display.

Data transmission

The energy cost measurement device has an internal, non-volative data memory with a capacity of up to
6 months. The display shows the remaining capacity in %. If this value drops to 2%, the MEM display
starts flashing. It is now necessary to read out and delete the required data memory, as otherwise no
data can be recorded.
During data transmission, the measurement device can be operated for mesurement
conversion. The SD card must not be removed or the measurement device unplugged.
This results in a risk of data loss.
32