Intended Use - VOLTCRAFT Energy Logger 4000 Bedienungsanleitung

Intended use

The energy cost measuing device serves to measure and analyse consumption details of electrical devices.
The measuring device is simply connected between the mains socket and the electric device and requires
no additional installation. Operation is only allowed at standard household protection mains sockets with a
nominal current of 230 V/AC. The max. nominal performance must not exceed 3500 watts. If the product is
overloaded, it may be damaged. The warranty/guarantee will become void in these cases. Do not plug
together several energy cost measuring instruments.
The measuring device has an internal, non-volative memory where the data for performance factor, cur-
rent and power can be saved for up to 6 months. Via an SD card slot this data can be transferred to a
computer for analysis.
Two additoinal freely programmable tariffs are available for cost calculation. The device also calculates a
cost preview per month and year. The consumption data can also be displayed directly on the device retro-
actively up to 9 days.
The measuring device is not officially calibrated and must therefore not be used for balancing purposes.
A buffer battery supplies the internal clock when switched off. The device may only be operated with the
specified batteries.
The measuring instrument must not be operated when it is open, i.e. with an open battery compartment
or when the battery compartment cover is missing. Measuring in damp rooms or under unfavourable
ambient conditions is not admissible.
Unfavourable ambient conditions are:
- Wet conditions or high air humidity
- Dust and flammable gases, vapours or solvent,
- Thunderstorms or similar conditions such as strong electrostatic fields etc.
Any use other than the one described above damages the product. Moreover, this involves dangers such
as e.g. short circuit, fire, electric shock, etc. No part of the product must be modified or rebuilt!
Read the operating instructions carefully and retain them for later reference.
The safety instructions must be observed at all times.
23